Coverart for item
The Resource New Challenges in Grid Generation and Adaptivity for Scientific Computing, edited by Simona Perotto, Luca Formaggia, (electronic resource)

New Challenges in Grid Generation and Adaptivity for Scientific Computing, edited by Simona Perotto, Luca Formaggia, (electronic resource)

Label
New Challenges in Grid Generation and Adaptivity for Scientific Computing
Title
New Challenges in Grid Generation and Adaptivity for Scientific Computing
Statement of responsibility
edited by Simona Perotto, Luca Formaggia
Contributor
Editor
Subject
Language
eng
Summary
This volume collects selected contributions from the zFourth Tetrahedron Workshop on Grid Generation for Numerical Computationsy, which was held in Verbania, Italy in July 2013. The previous editions of this Workshop were hosted by the Weierstrass Institute in Berlin (2005), by INRIA Rocquencourt in Paris (2007), and by Swansea University (2010). This book covers different, though related, aspects of the field: the generation of quality grids for complex three-dimensional geometries; parallel mesh generation algorithms; mesh adaptation, including both theoretical and implementation aspects; grid generation and adaptation on surfaces - all with an interesting mix of numerical analysis, computer science and strongly application-oriented problems
Member of
Image bit depth
0
Literary form
non fiction
http://library.link/vocab/relatedWorkOrContributorName
  • Perotto, Simona.
  • Formaggia, Luca.
  • SpringerLink (Online service)
Series statement
SEMA SIMAI Springer Series,
Series volume
5
http://library.link/vocab/subjectName
  • Mathematics
  • Computer simulation
  • Computer-aided engineering
  • Visualization
  • Numerical analysis
  • Mathematical models
  • Applied mathematics
  • Engineering mathematics
Label
New Challenges in Grid Generation and Adaptivity for Scientific Computing, edited by Simona Perotto, Luca Formaggia, (electronic resource)
Link
https://eui.idm.oclc.org/login?url=http://dx.doi.org/10.1007/978-3-319-06053-8
Instantiates
Publication
Antecedent source
mixed
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier.
Color
not applicable
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent.
Contents
1 Implicit boundary and adaptive anisotropic meshing: T. Coupez, L. Silva and E. Hachem -- 2 A curvature-adapted anisotropic surface re-meshing method: F. Dassi and H. Si -- 3 The benefits of anisotropic mesh adaptation for brittle fractures under plane-strain conditions: M. Artina, M. Fornasier, S. Micheletti and S. Perotto -- 4 Deforming surface meshes: S.-W. Cheng and J. Jin -- 5 An optimization based method for the construction of 2D parameterizations for isogeometric analysis with T-splines: J.I. Lòpez, M. Brovka, J.M. Escobar, J.M. Cascòn and R. Montenegro -- 6 Thread-parallel anisotropic mesh adaptation: G.J. Gorman, G. Rokos, J. Southern and P.H.J. Kelly -- 7 Immersed NURBS for CFD applications: J. Veysset, G. Jannoun, T. Coupez and E. Hachem -- 8 Strategies for generating well centered tetrahedral meshes on industrial geometries: S. Walton, O. Hassan and K. Morgan -- 9 Enhanced viscous mesh generation with metric-based blending: D. Marcum and F. Alauzet -- 10 On the generation of curvilinear meshes through subdivision of isoparametric elements: D. Moxey, M. Hazan, S.J. Sherwin and J. Peirò -- 11 Anisotropic, adaptive finite elements for a thin 3D plate: M. Picasso and A. Loseille -- 12 Anisotropic mesh and time step adaptivity for solute transport modeling in porous media: B. Esfandiar, G. Porta, S. Perotto and A. Guadagnini -- 13 A 2D topology-adaptive mesh deformation framework for mesh warping: J. Kim, D. McLaurin and S.M. Shontz -- 14 On shape deformation techniques for simulation-based design optimization: D. Sieger, S. Menzel and M. Botsch -- 15 Creating free-surface flow grids with automatic grid refinement: J. Wackers, G. Deng, E. Guilmineau, A. Leroyer, P. Queutey and M. Visonneau
Control code
978-3-319-06053-8
Dimensions
unknown
Extent
VIII, 325 p. 157 illus., 110 illus. in color.
File format
multiple file formats
Form of item
electronic
Governing access note
Use of this electronic resource may be governed by a license agreement which restricts use to the European University Institute community. Each user is responsible for limiting use to individual, non-commercial purposes, without systematically downloading, distributing, or retaining substantial portions of information, provided that all copyright and other proprietary notices contained on the materials are retained. The use of software, including scripts, agents, or robots, is generally prohibited and may result in the loss of access to these resources for the entire European University Institute community
Isbn
9783319060538
Level of compression
uncompressed
Media category
computer
Media MARC source
rdamedia.
Media type code
  • c
Other control number
10.1007/978-3-319-06053-8
Other physical details
online resource.
Quality assurance targets
absent
Reformatting quality
access
Specific material designation
remote
System control number
(OCoLC)1086460040
Label
New Challenges in Grid Generation and Adaptivity for Scientific Computing, edited by Simona Perotto, Luca Formaggia, (electronic resource)
Link
https://eui.idm.oclc.org/login?url=http://dx.doi.org/10.1007/978-3-319-06053-8
Publication
Antecedent source
mixed
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier.
Color
not applicable
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent.
Contents
1 Implicit boundary and adaptive anisotropic meshing: T. Coupez, L. Silva and E. Hachem -- 2 A curvature-adapted anisotropic surface re-meshing method: F. Dassi and H. Si -- 3 The benefits of anisotropic mesh adaptation for brittle fractures under plane-strain conditions: M. Artina, M. Fornasier, S. Micheletti and S. Perotto -- 4 Deforming surface meshes: S.-W. Cheng and J. Jin -- 5 An optimization based method for the construction of 2D parameterizations for isogeometric analysis with T-splines: J.I. Lòpez, M. Brovka, J.M. Escobar, J.M. Cascòn and R. Montenegro -- 6 Thread-parallel anisotropic mesh adaptation: G.J. Gorman, G. Rokos, J. Southern and P.H.J. Kelly -- 7 Immersed NURBS for CFD applications: J. Veysset, G. Jannoun, T. Coupez and E. Hachem -- 8 Strategies for generating well centered tetrahedral meshes on industrial geometries: S. Walton, O. Hassan and K. Morgan -- 9 Enhanced viscous mesh generation with metric-based blending: D. Marcum and F. Alauzet -- 10 On the generation of curvilinear meshes through subdivision of isoparametric elements: D. Moxey, M. Hazan, S.J. Sherwin and J. Peirò -- 11 Anisotropic, adaptive finite elements for a thin 3D plate: M. Picasso and A. Loseille -- 12 Anisotropic mesh and time step adaptivity for solute transport modeling in porous media: B. Esfandiar, G. Porta, S. Perotto and A. Guadagnini -- 13 A 2D topology-adaptive mesh deformation framework for mesh warping: J. Kim, D. McLaurin and S.M. Shontz -- 14 On shape deformation techniques for simulation-based design optimization: D. Sieger, S. Menzel and M. Botsch -- 15 Creating free-surface flow grids with automatic grid refinement: J. Wackers, G. Deng, E. Guilmineau, A. Leroyer, P. Queutey and M. Visonneau
Control code
978-3-319-06053-8
Dimensions
unknown
Extent
VIII, 325 p. 157 illus., 110 illus. in color.
File format
multiple file formats
Form of item
electronic
Governing access note
Use of this electronic resource may be governed by a license agreement which restricts use to the European University Institute community. Each user is responsible for limiting use to individual, non-commercial purposes, without systematically downloading, distributing, or retaining substantial portions of information, provided that all copyright and other proprietary notices contained on the materials are retained. The use of software, including scripts, agents, or robots, is generally prohibited and may result in the loss of access to these resources for the entire European University Institute community
Isbn
9783319060538
Level of compression
uncompressed
Media category
computer
Media MARC source
rdamedia.
Media type code
  • c
Other control number
10.1007/978-3-319-06053-8
Other physical details
online resource.
Quality assurance targets
absent
Reformatting quality
access
Specific material designation
remote
System control number
(OCoLC)1086460040

Library Locations

    • Badia FiesolanaBorrow it
      Via dei Roccettini 9, San Domenico di Fiesole, 50014, IT
      43.803074 11.283055
Processing Feedback ...